Pneumatic Timer - 56 Series KUAX Pneumatic Clock Timer Panel or Surface Mount Pneumatic Timer - OFF Delay Timing Pneumatic Mini Timer Panel Mount QY000 QY009 Surface mount bracket sold separately, page 7. Accessories, page 7. Set the pneumatic timer by adjusting the front rotary knob to the desired set- point. Two vertical scales indicate the set time and the remaining cycle time. The 56 series pneumatic timer has a geared timing mechanism for precision, designed with conventional sweeping timing hands and a large rotary knob for quick and easy operation. The OFF is delayed. The output valve is positive while timing and negative on timeout. Normally open timing.
ON or OFF delay timing is achieved by blocking the respective ports with a blanking plug. Set the time by adjusting a large rotary knob. A black timing hand shows the preset time, and a red timing hand the remaining time. ATEX Versions Available Pneumatic Timer - ON Delay Timing Pneumatic Mini Timer Panel or DIN-Rail Mount Pneumatic Timer - Reset Module Pneumatic Automatic Reset Module Panel Mount QY006 QY005 DIN-rail mount sold separately, page 7. Accessories, page 7. Automatic reset modules are used alongside ON delay timers to create continuous pneumatic pulsed output signals from 0.2 to 2 seconds. The ON delay timer separates these pulsed outputs.
Set the pneumatic timer by adjusting the front rotary knob to the desired set- point. Two vertical scales indicate the set time and the remaining cycle time. Automatic reset timers generate output signals that repeat while air is connected. Removal of air stops and resets the circuit. The front rotary knob sets the desired output time and, when pulled, resets the device. The ON is delayed. The output valve is negative while timing and positive on timeout. Normally closed timing. ATEX Versions Available ATEX Versions Available 4 sales@impulseautomation.co.uk | www.impulseautomation.co.uk | +44 (0) 1264 364194 Technical information Pressure range: 0-10 bar Temperature range:
-10°C +60°C Mounting: Panel mount Reset: Automatic - by removal of pressure (Control port 12) Air consumption: Approx. 9 l/min Technical information Pressure range: 2-6 bar Temperature range: 0°C +60°C Mounting: Panel mount Reset: Automatic - by removal of pressure port 12 Operating Medium: 5 micron filtered clean dry, non-lubricated compressed air Description Order code 0.3 to 10 seconds 56.S21.010 3 to 100 seconds 56.S22.100 0.3 to 10 minutes 56.M23.010 3 to 100 minutes 56.M24.100 0.3 to 10 hours 56.H25.010 3 to 100 hours 56.H26.100 Ports M5 Description Order code 2 to 30 seconds 51.021.03.00 20 to 300 seconds 51.021.30.00 Ports M5 Technical information Pressure range:
2-6 bar Temperature range: 0°C +60°C Mounting: Panel mount Reset: Automatic - by removal of pressure port 1 Operating Medium: 5 micron filtered clean dry, non-lubricated compressed air Technical information Pressure range: 2-6 bar Temperature range: 0°C +60°C Mounting: Panel mount Reset: Automatic - by removal of pressure port 1 Operating Medium: 5 micron filtered clean dry, non-lubricated compressed air Description Order code 0.2 to 3 seconds 51.020.33.00 2 to 30 seconds 51.020.03.00 8 to 120 seconds 51.020.34.00 20 to 300 seconds 51.020.30.00 Ports M5 Description Order code 0.2 to 2 seconds 51.020.35.00 Ports M5