Licensing Installing or Upgrading a CEView License (Locally) Tip: You can purchase some Windows Embedded devices with a CEView softkey license already installed. Ask your software vendor about this possibility. You can register a CEView license on your Windows Embedded device by using the Remote Agent utility on the device itself. This works for both hardkey and softkey licenses. To install a new (or upgrade an existing) CEView softkey license (locally): 1. Download the Remote Agent program ( CEServer.exe ) into the \ Non-Volatile Folder path of the Windows Embedded device. The \ Non-Volatile Folder must retain this data after you reboot the Windows Embedded device. Note:
The \ Non-Volatile Folder path can vary with each Windows Embedded device manufacturer. After installing InduSoft Web Studio on the Win2K/XP/Vista computer, the Remote Agent program file ( CEServer.exe ) is stored in the following path: […]\InduSoft Web Studio v7.0\Redist\ version \ processor \Bin\CEServer.exe …where: • version indicates the operating system version. • processor is the Windows Embedded device processor type (for example, x86 ). Note: In some Windows Embedded devices, the \ Non-Volatile Folder points to a FlashCard memory that is connected to the device.
Also, before downloading the Remote Agent program ( CEServer.exe ) to your Windows Embedded device, be sure it is not already loaded in the \ Non-Volatile Folder . Tip: • There are two ways to download the Remote Agent program ( CEServer.exe ) to a Windows Embedded device: • You can use the Microsoft ActiveSync ® utility to download/upload files from a Win2K/ XP/Vista station to a Windows Embedded device. You can download ActiveSync from the Microsoft Web site at no charge. • You can use the following command syntax to map a shared folder from a Win2K/XP/ Vista computer to most Windows Embedded devices: net use [ LocalName ] [ RemoteName ] [/user:
UserName ] After executing this command successfully, open a Command Prompt window and use a COPY command to copy files to the Windows Embedded device. • We strongly recommend that you configure the Windows Embedded device to execute the Remote Agent program automatically when you power on the Windows Embedded device. See the Windows Embedded device manufacturer's documentation for information about how to configure the Startup program on the device. Page 46 InduSoft Web Studio