Familiarising yourself with your appliance en Over-and-under and side-by-side installation If you want to install 2 refrigerating appliances one over the other or side by side, you must maintain a clear- ance of at least 150 mm between the appliances. Selected appliances can be installed without a minimum clear- ance. Ask your dealer or kitchen planner about this. Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. → Fig.
1 → Page 20 B Freezer compartment → Page 21 4.3 Installing the appliance ▶ Install the appliance in accordance with the enclosed installation in- structions. 4.4 Preparing the appliance for the first time age container) → Page 18 1. Remove the informative material. 2. Remove the protective foil and transit bolts, e.g. remove the ad- hesive strips and carton. 3. Clean the appliance for the first → Page 16 6 Fruit and vegetable container with humidity control → Page 16 7 Frozen food container → Page 24 time. → Page 23 4.5 Connecting the appliance to the electricity supply 1. Insert the mains plug of the appli- ance's power cable in a socket nearby.
The connection data of the appli- ance can be found on the rating plate. → Fig. 1 / 4 2. Check the mains plug is inserted for large bottles → Page 17 Note: Deviations between your appli- ance and the diagrams may differ with regard to their features and size. properly. a The appliance is now ready for use. 5.2 Control panel You can use the control panel to con- figure all functions of your appliance and to obtain information about the operating status. → Fig. 2 15 A Refrigerator compartment 1 Lighting 2 Interior ventilation opening 3 Temperature controller (stor- 4 Rating plate → Page 29 5 Storage container 8 Screw foot 9 Control panel → Page 15 10 Door storage compartment