Basic settings en Basic settings 17 Basic settings You can configure the basic settings for your appliance to meet your needs. 17.1 Overview of the basic settings Display Setting Value Childproof lock → "Childproof lock", Page 12 - Automatic. - Manual. 1 - Function switched off. Audible signals - The confirmation signal, the fault signal and the sig- nal for incorrect use are deactivated. - The confirmation signal and the signal for incorrect use are activated. - The fault signal is activated. - All signal tones are switched on 1 . Volume of the audible signals - Quiet. - Medium. 1 – Loud. Assign one of the time-setting programme functions to on the control panel.
→ "Time-setting options", Page 10 - Switch-off timer. 1 - Timer. Power limitation This enables you to limit the total power of the hob, if required, due to the circum- stances of your electrical installation. Ob- serve the regulations of the local electricity suppliers. The available settings depend on the maximum power of the hob. You can find more information on the rating plate. If the function is switched on and the hob has reached the set power limit, the required and permitted power level flashes and you can- not select a higher power level. The power is increased by 500 W with each level. – Switched off. Maximum power of the hob 1 . - 1000 W. Lowest power setting. . - 1500 W. ...
- 3000 W. . - 3500 W. - 4000 W. . - 4500 W. ... - Maximum power of the hob. Demo mode Demonstration mode for the hob: When you switch on the hob, lights up for a few seconds and the cooking zones do not heat up. - Switched off. 1 - Switched on. Cookware test You can use this function to test the quality of the cookware. → "Cookware test", Page 14 - Not suitable. - Not optimal. - Suitable. - Hob-based hood control The settings are configured based on the ex- tractor hood model. → "Overview of the hood control settings", Page 17 Restoring factory settings - Individual settings 1 . - Factory settings.
1 Factory setting 17.2 To go to the basic settings Product information Display Production number 1 Production number 2 Requirement: The hob must be switched off. 1. To switch on the hob, touch . 2. Within the next 10 seconds, touch and hold for 4 seconds. a The first four displays provide the product informa- tion. Touch to view the individual displays. 3. Touch to access the basic settings. a and light up as a presetting. 4. Touch repeatedly until the desired setting ap- pears. Product information Display Customer service directory Production number 13