en Installation and connection 4.2 Saving energy 5.2 Installing and connecting the appliance If you follow these instructions, your appliance will use less electricity and less water. You can position your built-under or integrable appliance in a fitted kit- chen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appli- ance, you must stop it from tipping over, e.g. by screwing it to the wall or installing it under a continuous work- top that is securely connected to ad- jacent cabinets. 1. Follow the safety instructions. Use the Eco 50° programme. a The Eco 50° programme is en- ergy-efficient and environmentally friendly.
→ "Programmes", Page 18 5 Installation and con- → Page 4 2. Follow the instructions for electrical nection connection. 3. Check the Scope of supply and To ensure proper operation, connect the appliance to the power and water supply correctly. Observe the spe- cified criteria and the installation in- structions. the condition of the appliance. 4. Consult the installation instructions for the installation dimensions re- quired. 5. Make the appliance level using the 5.1 Scope of supply height-adjustable feet. Make sure that the appliance is standing on the floor securely. 6. Install the drainage connection.
After unpacking all parts, check for any damage in transit and complete- ness of the delivery. If you have any complaints, contact the dealer who sold you the appli- ance or our Customer Service. Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: Ў Dishwasher Ў Operating instructions Ў Installation Instructions Ў Further information documents Ў Installation material Ў Steam guard plate Ў Salt filling aid funnel Ў Mains cable Ў Quick reference guide → Page 12 7. Install the drinking water connec- tion.
→ Page 13 8. Connect the appliance to the power supply. 5.3 Drainage connection Connect your appliance to drainage connection so dirty water is dis- charged via the wash cycle. Installing the drainage connection 1. Consult the installation instructions supplied for the steps required here. 2. Connect the wastewater hose to the outlet connection of the siphon using the enclosed parts. 12