int e l 1.4 QUICK REFERENCE COMMANDS:
COMMAND FUNCTION EXAMPLE(S) PROG5 same as PROG4 except that external RAM is not PROG5 cleared on RESET or power up if external RAM contains a 0A5H in location 5EH (version 1.1 only) PROG6 same as PROG6 except that external code location PROG6 4039H is CALLED after RESET (version 1.1 only) FPROG save the current program in EPROM using the FPROG INTELligent algorithm FPROG1 save baud rate information in EPROM using the FPROG1 INTELligent algorithm FPROG2 save baud rate information in EPROM and execute FPROG2 program after RESET, use INTELligent algorithm FPROG3 same as PROG3, except INTELligent programming FPROG3 algorithm is used (version 1.1 only) FPROG4 same as PROG4, except INTELligent programming FPROG4 algorithm is used (version 1.1 only) FPROG5 same as PROG5, except INTELligent programming FPROG5 algorithm is used (version 1.1 only) FPROG6 same as PROG6, except INTELligent programming FPROG6 algorithm is used (version 1.1 only) - 177 -