Delta ISPSoft — 20.3.4.3 Device Synchronization in Data Exchange Table

Chapter 20 Network Configuration and Data Exchange  Linked Status To set on the linked status to enable data exchange for data exchange groups.  Read The device type on both sides should be the same. The data length is the number for exchange. To read from the device starting address of Slave Parameter Setting the device starting address of Master Parameter Setting.  Write The device type on both sides should be the same. The data length is the number for exchange. To read from the device starting address of Master Parameter Setting the device starting address of Slave Parameter Setting.

For section planning, the same section data can write into multiple different positions but does not allow different section data to store in the same position. Base on the image above, the content data in master station D3100~D3149 can repeat and write in different slave station, but section in master station D3000~D3099 cannot receive data from other slave stations.

20.3.4.3 Device Synchronization in Data Exchange Table In Device Type column of the data exchange table, the appearing content is based on the host model type of each station address as well as according to the current configuration in the NWCONFIG Graphic Work space; when a host has multiple station address, the host type is shown in the Device Type column. 20-49