Chapter 20 Network Configuration and Data Exchange When the master station device is AH5x0 series and executing upload but finds the current NWCONFIG not matched, the modified PLC type is marked in red to remind users and the status is auto-switched to Disabled . When the master station device is DVP series, since the host of DVP series cannot save the device type in data exchange table, it is not possible to check on the PLC type base on the data uploaded. Therefore, the Device Type column shows the name of the PLC type base on the Graphic Workspace. For unreasonable settings, the status is auto-switched to Disabled .
20.3.4.4 Managing Data Exchange Table There are buttons under the data exchange table in the PLC Link Table Editor window. Please refer to the the previous step. table below for more information about the buttons. If users click , the system will lead the users to 20-51