ISPSoft User Manual If the users want to delete all the asynchronous devices at the same time, they can click Synchronize All Nodes on the Edit menu, or on the toolbar. 20.4.9 Enable/Disable Online Monitoring Function online monitoring functions provided by NWCONFIG. The users can enable/disable the function of monitoring a In the Ether Link Configuration window, users can execute or test the Ether Link constructed by means of the single node/multiple nodes online. Before the users enable the online monitoring function, they have to make sure that all the nodes are connected according to the network framework created in NWCONFIG, and can operate normally.
(a) Every node has been connected to a network according to the network framework created in NWCONIFG. (b) The users have set the parameters for Ethernet ports of the nodes by means of HWCOFNIG, and the consistent with the setting in NWCONFIG. parameters have been downloaded to the PLCs and the modules. The setting of the parameters must be (c) The parameters related to an Ether Link have been downloaded to the PLC selected. (d) Every node is powered up, and can operate normally.
20-74 Enabling/Disabling Description Single node Function Enabling or disabling the function of monitoring the node selected online Condition The users have to make sure that ISPSoft can connect to the PLC selected normally, and they have completed the communication setting in NWCONFIG. Multiple nodes Function Enabling or disabling the function of monitoring all the nodes online Condition The users have to make sure that all the nodes are connected to a network, and can connect to ISPSoft through Ethernet. The connection type that the driver selected in the Driver Name drop-down list box in the Select a Driver window uses must be Ethernet.