Delta ISPSoft — 21.3.1 Introduction of CARD Utility

Chapter 21 Data Backup and Data Restoration  If users export data from an AH series CPU module as a backup file (*.dup), the data exported can be saved in the memory card or in the computer. Users can also export the values in the devices in the AH/AS series CPU module.  If users export an ISPSoft project as a backup file (*.dup) can only be saved in the computer. Data such as register editing (*.dvl), device status editing (*.dvb), file register editing (*.wft) of AS series can be seen as values in the device and can be exported and saved as backup files.  Users can download the backup file saved in the inserted memory card back to the CPU module.

 Users can import a backup file (*.dup) saved in a computer back to the AH series CPU module or restore the backup file to an ISPSoft project. For AS series, if the users choose to restore the backup file to an ISPSoft project, the system will automatically skip the values in the devices and the hardware configuration in the backup file. Data such as register editing (*.dvl), device status editing (*.dvb), file register editing (*.wft) of AS series and AHxxEMC can be seen as values in the device and can be imported back to restore the ISPSoft project. After users double-click CARD Utility in the project management area, the system will open the CARD Utility window.

Select the controller and PLC type from the drop-down list and then click Next to start. 21−7