Delta ISPSoft — 22.2.3 Using E-CAM Editor

Chapter 22 G-Code Editor and E-CAM Editor Click Upload Slave Data [PC=> Data Register/Servo] and in the pop-up window, we can upload 6 key points, so the E-CAM area number is changed to 5 and click Transfer to finish uploading. The following diagram shows that 6 key points are re-drawn on the E-CAM table. When in File Mode , users need to export E-CAM table for edit. Right-click on the E-CAM item and choose Export. Select a path and file name, then click Save to complete exporting. 22-21