Delta ISPSoft — B.1.1 AH/AS Series Device Types

ISPSoft User Manual AH/AS series PLCs are slightly different from DVP series/DVPxxMC/AS5xx series PLCs. Users have to read the manuals for different models before they develop projects. The points to which users have to pay attention when they develop a project for an AH/AS series/ DVP series /DVPxxMC/AS5xx series CPU module are described in appendix B. B.1 Device Addresses for PLC Types B.1.1 AH/AS Series Device Types The device types of AH/AS series CPU modules are listed in the following table. B-2 Device Access Description type property X Bit/Word Input relay: It represents the state of a digital input. (*1) Y Bit/Word Output relay: It represents the state of a digital output.

(*1) M Bit Auxiliary relay: The state of a bit is stored in an auxiliary relay. S Bit Stepping relay: It is used as a state flag for a step in a sequential function chart. D Bit/Word Data register: Operation data is stored in a data register. (*1) L Bit/Word Link register: A link register is used for data exchange. (*1) (*2) T Bit Timer: If a timer is used as a bit device, the timer is ON when the time interval which is measured conforms to the setting value, and the timer is OFF when the time interval which is measured does not conform to the setting value. Word Timer: If a timer is used as a word device, the value stored in the timer is the present value of the timer. C Bit Counter:

If a counter is used as a bit device, the counter is ON when the number of times a particular event or process has occurred conforms to the setting value, and the counter is OFF when the number of times a particular event or process has occurred does not conform to the setting value. Word Counter: If a counter is used as a word device, the value stored in the counter is the present value of the counter. HC Bit 32-bit counter:

If a 32-bit counter is used as a bit device, the 32-bit counter is ON when the number of times a particular event or process has occurred conforms to the setting value, and the 32-bit counter is OFF when the number of times a particular event or process has occurred does not conform to the setting value.