Chapter 3 PLC System Configuration & Settings 3.1.3.2 Replace the Module The following steps show you how to replace the module. (1) Select and right-click the module for replacement in Hardware Configuration area or from CPU Group Information section. (2) Choose Replace on the context menu. After that you can see two different types of replacements for selection, Same Type and All Type . Same Type Replace only the selected module with the same type module. The new module Input/Output Device Range will be the same, while other parameters may return to system defaults if they cannot be matched. All Replace selected module to be any type of module.
The result is similar to deleting the original module by adding a new one, so the new module Input/Output Device Range will be re-configured and other parameter settings will also return to system defaults. 3-51