ISPSoft User Manual *Parameter values shown on the IO-Link tab in HWConfig are physical values transferred from voltage signals. As device addresses read by ISPSoft are voltage signals as well, users should verify before starting to use. 3.1.3.18 Tag Configuration This function is only supported when HWConfig is opened via ISPSoft.. HWConfig provides user-defined variables in Normal Exchange Area for PLC CPUs and modules, which would able to be functioned in Global HWCONFIG Variables under Global Symbols. Create Tags First, choose the target CPU or module and click on the CPU’s name on the left side of Edit Area. Then open the “Normal Exchange Area” to specify the tag name and comment.
*Tag’s naming rules: The maximum length is 40 characters./ Special characters are not allowed, such as *, #, ?, \, %, @, etc./ Numbers cannot be used in the beginning of the name./ Disallow duplicate names. 3-80