Chapter 3 PLC System Configuration & Settings 3-207 Remote Station Address The slave station address of the data exchange table, One address can be set for multiple data exchange tables. It is a station address for COM2 tab and IP for Ethernet tab. Local Address The device address range used by the master in the data exchange table > 「 >」: Output; the data block where the master write to a slave Remote Address The device address range used by a slave in the data exchange table The device range will be in hexadecimal display, if the slave in the data exchange table is a user-defined MODBUS Device.
Quantity The size of the data exchange table, which is basically consistent with the result calculated from the device range.