Chapter 3 PLC System Configuration & Settings 3.6 Parameter Settings for DVPxxMC Series PLC 3.6.1 Opening the PLC Parameter Setting Window After double-clicking HWCONFIG in the system configuration area, users can select Setting from the Parameter field and the Device Setting window will appear. The parameters which can be set vary with the models or hardware of the CPU modules. Before setting the parameters in a CPU module, users have to refer to the operation manual for the CPU module and to make sure the effect of the setting parameters have on the CPU module and the whole system is safe, so as to avoid system damage or staff injuries. *.
The parameter settings are not effective until they are downloaded to the CPU module. Refer to section 3.8.4 for the download method. Information Device 3-219