ISPSoft User Manual Uploading the system parameters After users click Upload on the Option menu, or on the toolbar, the system parameters in the CPU module will be uploaded to HWCONFIG. The items which will be uploaded include the hardware configuration, the parameters in the modules, and the parameters in the CPU module, but do not include the parameters in the intelligent modules. For AH5x0 series, the PLC parameter setting window provides the function of uploading and downloading, but only for the CPU parameters. Click to download PLC parameters and to upload PLC parameters in the upper left of the PLC parameter setting window. All CPU parameters will be uploaded during uploading.
During downloading data, users can select the parameters to be downloaded in the following window rather than downloading all settings to the CPU module. The CPU module must be in STOP state if CPU or Ethernet –Advance checkboxes are selected in the following window. And so the system will show a reminder message before the downloading starts if the CPU module is in RUN state. *1. If the name of the CPU module is different from the name attached to the model in the project 3-244