ISPSoft User Manual Force ON : The channel selected is forced ON. Force OFF: The channel selected is forced OFF. Release : The channel selected is not forced ON/OFF. Release all : All the channels are not forced ON/OFF. Changing the values of the parameters in a module If a module is assigned data registers, users can change the values in the data registers after the hardware configuration enters the online mode. However, on account of the design of the module, the CPU module and the module may need to run to produce the values of the parameters before the values in the data registers are changed.
(1) If the hardware configuration is in the online mode, users can double-click a module to open the Parameter Setting window, and click a parameter type which will be set at the left side of the window. The users will find that the appearance of the table in the window is quite different from the appearance of the table in the offline mode. 3-252