ISPSoft User Manual There are two ways to create a monitoring table. Users can create a monitoring table online or offline. Method 1 Click New Devices Table on the PLC menu, or on the toolbar. Method 2 Right-click Device Monitoring Table in the project management area and click Add . Type a table name in the Add Monitor Table window, and then click OK . An item will be under Device Monitor Table in the project management area. If users want to open the monitoring table, they can double-click the item. Users can create several monitoring tables in the project, and the monitoring tables created will be saved with the project. After the item is double-clicked, a window will appear.
The users can add items which will be monitored to the window. If the users want to add an item to the window, they have to double-click the blank in the monitoring table, or type a device name directly, and type a start address and the number of devices which will be monitored in the Device Monitor Input window. Please notice that 100 items at most can be added to a monitoring table. 4-38