ISPSoft User Manual Additional remark After the program above is compiled successfully and downloaded to the PLC, the users can upload the program in the PLC to WPLSoft. The program uploaded to WPSoft is shown below. the POUs are executed is Run_Stop Shift LED . The contents of the interrupt subroutine I201 are the same The main program is composed of the three POUs which are assigned to the cyclic task. The order in which the as the contents of the POU Reset . The users can remove Run_Stop from the Tasks section, and disable Shift . After the program is compiled and downloaded to the PLC, the users can upload the program in the PLC to WPLSoft.
The main program will not include the two POUs Run_Stop and Shift . 5-48