ISPSoft User Manual 6.2.11 Device Resource Allocation Setting The devices automatically assigned to the symbols in a project for a DVP series PLC are devices available to users. Users set a range of devices which can be automatically assigned to the symbols in a project so that they can manage the devices conveniently. They can set a range of devices for a project created. When the program in a project is compiled, devices within the range which is set are assigned to the symbols. If the number of symbols is larger than the devices within the range, an error message showing that the devices are insufficient will appear after the program in a project is compiled.
Please refer to section 6.1.4 for more information about assigning devices to the symbols in a project. Unfold the PLC section in the project management area in a project for a DVP series PLC, double-click Device Resource Allocation . limitations. For example, the data registers in a DVP-SV series PLC start from D2000, the auxiliary relays start Users can set a device range in the Device Resource Allocation window. Every type of device has its from M2000, the counters are 16-bit counters, and the timers take 100 milliseconds as the timing unit. If users select a device address which is not allowed, the system will modify it automatically. Click OK after the setting is complete.
The setting here will be saved with the project. 6-42