ISPSoft User Manual Users can also right-click the EtherCAT Table and select Synchronize with ECAT Builder on the context menu to view synchronized information of the ECAT Builder, Axis and EtherCAT Table. The full name of the node item under Axis contains the axis variable name and axis type mentioned above. The axis type here which is the same as that in the parameter setting can be the EtherCAT slave name and the station address of a virtual or real axis. There are two sub-items, Axis Parameter and Monitor & Test Run under every node. Refer to the following sections for more information. Axis Variable Name (Axis Type) 9-4