Chapter 2 Starting and Setting ISPSoft After a project is successfully created, the ISPSoft window title displays the project name, under the format of project name [Program Title] . When no program title is setup, the window will display only the project name. When users want to view or modify the program title, users can click Edit from the toolbar and select Project Properties to type in the information. Under Project, users can view the path of the project file and selected model. For AH/AS series projects, the PLC label name is shown in parentheses next to the selected model, and the project name is set as default. However, the project name can be reset in HWCONFIG .
Users can refer to section 3.3.2.1 for more information. *. Only AH/AS and DVPxxMC/AS5xx series have PLC label names, but DVP series do not. The main function of the label name is to perform device identification, especially for network applications or other online operations. The gathered information can be used to check whether the object is operating as we expected. Save project When a project is created, the file denoted by a path is not established immediately. Users need to click ‘Save’ first for the file to exist. To ‘Save’ a project, please refer to the following description. 2-19