ISPSoft User Manual Choose the added motion module project based on file name and type in the Open Project window, then click Open . The slot number is set as undefined. When adding a PMSoft project, the file is copied to the path concerning ISPSoft projects, while the original PMSoft project is saved in the former path. The file format used in PMSoft version 2.05 or above is applied to the added PMSoft project, but does not apply to DVP-PM projects; when adding an ISP project file, a file is created and copied to the path concerning ISPSoft projects.
Change Slot Number If users want to change the slot and rack number in a motion module project, right-click the selected project and choose Change Slot No. from the quick menu. Select the Rack No. and Slot No. from the drop-down list. Please do not select a slot number which is already occupied, then click OK. 2-32