ISPSoft User Manual Before the values are written into the registers, users have to make sure that the operation does not affect the system, or cause damage to the system and staff. The values in the Edit Register Memory window can be saved with the project. If the present window is the whose primary filename is the project name in the folder in which the project (*.isp) is saved after the users click Edit Register Memory window, the values in the Edit Register Memory window will be saved as a .dvl file Save on the File menu or the toolbar.
If the users want to open the Edit Register Memory window in the project again, the system will open the dvl file in the folder in which the project (*.isp) is saved. If no dvl is in the folder in which the project is saved, the values in the Edit Register Memory window will be 0. Besides, the users can save the values in the Edit Register Memory window as a dvl file in another folder after they click Save As on the File menu. If the users want to open the dvl file which was saved previously, they can click Open on the Fil e menu or the toolbar. 17-48