ISPSoft User Manual 2.4.3.3 Communication Parameter Setting - DirectLink (USB) (1) Type the Driver Name . To add special marks, only ‘_’ can be used. (2) For Connection Setup , select DirectLink (USB) from the drop-down list for Type . (3) Choose from the HMI USB Mode . When selecting CDC Mode , choose the desired COM Port from the drop-down list. For more methods regarding connection, please refer to Delta HMI user manuals. (4) To setup parameters concerning responding time. For Connect Retries, users need to setup the number of interval between retries.
retry once connection error occurs, while for Connection Time-Out setting, the parameter concerns the time 2.4.3.4 Communication Parameter Setting - Ethernet (1) Type the Driver Name . To add special marks, only ‘_’ can be used. (2) For Connection Setup , select Ethernet from the drop-down list for Type . (3) For Ethernet Card , select the desired network card from the drop-down list. The current IP address is shown below the description. 2-48