ISPSoft User Manual The important points about routing are listed below. (a) Users have to create networks in NWCONFIG, and download the routing tables produced to nodes in the networks. Please refer to section 20.2 for more information. (b) AH5x0 series CPU modules support routing whereas DVP series PLCs and other devices do not support routing. Although DVP series PLCs and other devices cannot function as intermediate nodes through which packets pass, they can function as destinations to which packets are transmitted. 20.1.3.2 Setting Communication Parameters The steps of setting the communication parameters in NWCONFIG are as follows. Please follow the steps to ensure normal connection.
(1) Start the communication manager COMMGR, and check the status of the driver as OK. (2) When using Single node , please check the object for operation is the same as the actual device for connection; When operating in Multiple node , please check that all operating devices are linked to the Ethernet and as planned in NWCONFIG. (3) Click Communication Setting on the Tools menu or on the toolbar in the NWCONFIG window. After the users complete the setting described below, they can click OK in the Select a Driver window. 20-8