ISPSoft User Manual 20.2.2 Connecting to a Network After users deploy the nodes in the NWCONFIG window, they can connect the nodes to the networks designed. There are three ways to add a network to the working area. There are Ethernet networks and RS-485 networks. Method 1 After users click on the toolbar, an Ethernet network is added. After the users click on the toolbar, an RS-485 network is added. Method 2 Click the Edit menu, point to Add a Networ k, and click Ethernet or RS-485 . Method 3 Right-click the blank in the working area, point to Add a Network on the context menu, and click Ethernet or RS-485 . The ports of a device are displayed at the bottom of the device.
If a port is blue, it is an RS-485 port. If a port is 20-18