D.2 European Standards Single-Phase 200 V Class N E D H F A G A – Ground the cable shield B – Enclosure panel C – Metal plate D – Grounding surface (remove any paint or sealant) E – Drive F – Motor cable (braided shield cable, max. 20 m) G – Motor H – Cable clamp I – Wiring distance as short as possible J – EMC noise filter Figure D.5 EMC Filter and Drive Installation for CE Compliance (Single-Phase 200 V Class) n EMC Filters The drive should be installed with the EMC filters listed below in order to comply with the EN 61800-3, category C1 requirements.
Table D.2 EN 61800-3 Category C1 Filters Standards Compliance SIEP C710606 33A OYMC AC Drive – J1000 User Manual 215 D B C D E N L1 J I Drive JZA Filter Data (Manufacturer:
Schaffner) Type Rated Current (A) Weight Dimen (kg) [W x L x sions H] (mm) Y x X Drive Mounting Screw A Filter Mounting Screw 200 V Single-Phase Units B0P1 A1000–FIV1010–SE 10 0.44 71 x 16 9 x 45 51 x 156 M4 M5 B0P2 A1000–FIV1010–SE 10 0.44 71 x 16 9 x 45 51 x 156 M4 M5 B0P4 A1000–FIV1010–SE 10 0.44 71 x 16 9 x 45 51 x 156 M4 M5 B0P7 A1000–FIV1020–SE 20 0.75 111 x 1 69 x 50 91 x 156 M4 M5 B1P5 A1000–FIV1020–SE 20 0.75 111 x 1 69 x 50 91 x 156 M4 M5 200 V Three-Phase Units 20P1 A1000–FIV2010–SE 7.3 0.4 71 x 16 9 x 40 51 x 156 M4 M5 20P2 A1000–FIV2010–SE 7.3 0.4 71 x 16 9 x 40 51 x 156 M4 M5 20P4 A1000–FIV2010–SE 7.3 0.4 71 x 16 9 x 40 51 x 156 M4 M5 20P7 A1000–FIV2010–SE 7.3 0.4 71 x 16 9 x 40 51 x 156 M4 M5 21P5 A1000–FIV2020–SE 14 0.6 111 x 1 69 x 45 91 x 156 M4 M5 22P2 A1000–FIV2020–SE 14 0.6 111 x 1 69 x 45 91 x 156 M4 M5 24P0 A1000–FIV2030–SE 24 0.9 144 x 1 74 x 50 120 x 161 M4 M5 400 V Three-Phase Units 40P2 A1000–FIV3005–SE 5 0.5 111 x 1 69 x 45 91 x 156 M4 M5 40P4 A1000–FIV3005–SE 5 0.5 111 x 1 69 x 45 91 x 156 M4 M5 40P7 A1000–FIV3005–SE 5 0.5 111 x 1 69 x 45 91 x 156 M4 M5 41P5 A1000–FIV3010–SE 10 0.7 111 x 1 69 x 45 91 x 156 M4 M5 42P2 A1000–FIV3010–SE 10 0.7 111 x 1 69 x 45 91 x 156 M4 M5 43P0 A1000–FIV3010–SE 10 0.7 111 x 1 69 x 45 91 x 156 M4 M5