4.2 Using the Digital LED Operator u Digital Text Display Text appears on the LED Operator as shown below. This section explains the meaning of text as it appears on the display screen. Table 4.2 Digital Text Display Displayed in two digits. u LED Screen Displays Start-Up Programming & Operation 4 Refer to Figure 4.1 for the difference between “flashing” and “flashing quickly”. SIEP C710606 33A OYMC AC Drive – J1000 User Manual 55 No. Display Name Function 12 13 ALM L REV L ED Light ED Light Refer to LED Screen Displays on page 55.
14 15 DRV L FOUT ED Light LED Light Lit Flashing Text LED Text LED Text LED Text LED 0 9 I R 1 A J S 2 B K T 3 C L U 4 D M V 5 6 E F N O W X none 7 8 G H P Q Y Z none Display Lit Flashing Off • When the drive detects an alarm or error • Motor is rotating in reverse When an alarm occurs oPE detected — Normal state (no fault or alarm) Motor is rotating forward As illustrated in Drive Mode Displays output frequency (Hz) — — Programming Mode — this manual u LO/RE LED and RUN LED Indications LED Lit Flashing Flas hing Quickly Off W sel (L hen run command is ected from LED oper OCAL) ator — — ( Run command is selected from device other than LED operator REMOTE) Du ring run • Durin • During deceleration to stop stop.
• When a run command is input • Durin and frequency reference is 0 operat g deceleration at a fast- g stop by interlock ion. During stop As shown