means the vehicle battery voltage is normal and ready for jump-starting. Notes: * If the Status Indicator doesn't turn on, press and hold the BOOST Button to enable the forced output mode. * The jump starter has a built-in buzzer that will ring when a reverse polarity, over-temperature, over-circuit, and other improper connections are detected. Disconnect the jump starter if the buzzer rings and connect again after the issue is resolved. Step 4: Try starting the vehicle. If it fails, disconnect the clamps from the vehicle's battery and wait for 20 seconds, then reconnect and try again. Do not attempt more than 3 consecutive jump-starts within 2 minutes. EN | 11