Step 3 Installation of dedicated tool The procedure for installing the software tool is explained below. 使用上の注意 使用上の注意 Precautions for Correct Use Your computer may be set to show a User Account Control message box during installation. If there is no problem, click the [Yes] Button. (1) Download the software tool from our website. https://www.ia.omron.com/k6pm_tool (2) Run "setup.exe" in the downloaded software. The Select Language dialog box appears. 使用上の注意 使用上の注意 Precautions for Correct Use If the following dialog box appears, the same version of the software tool as the installer you ran has been installed on your computer.
If you do not need to reinstall or uninstall the software tool, click the Cancel Button to close the installation window. • Explanation of option buttons Change: Select to change the functions that are installed. Do not use this option because it is for future use. Modify: Select to reinstall the software tool. Delete: Select to uninstall the software tool. 4