Routing - tab This tab contains p arameters for the repeater which are routing - based . Next Hop Repeater This parameter is used in multiho 1: No multihop : T he repeater does not support multihop 2: Dynamic multihop : All incoming packet retransmitted if hop count of packet is less than two . With this setting, the parameters R 3: Static multihop : Retransmits packets coming from repeaters set in parameters Retransmit repeater or coming directly from meters 4: Static multihop : Same as the option above but supports up to four hops. Note that this value is only supporter o n repeater with sof