[Public] 56268 Rev. 1.05 November 2021 AMD NVMe/SATA RAID Quick Start Guide for Windows Operating Systems 6. At the Load Driver Warning message: Select OK. 7. At the Select the Driver to install window: Select Browse. Navigate to the directory containing the saved AMD-RAID drivers. Select OK. Select the AMD-RAID Controller (rcraid.inf) driver in the list. Select Next. Select (Check Mark) I Accept the License Terms. Select Next. Select Custom: Install Windows Only (advanced) or similar. 8. Once both drivers have been loaded, a valid Virtual Disk appears: Select Load Drivers. Select Browse. Navigate to the directory containing the saved AMD-RAID drivers. Select OK.
Select the AMD-RAID Config Device ( rccfg.inf ) driver from the list. Select Next. 9. Select Next at the Where do you want to install Windows window. 10. Follow the on-screen instructions to complete the installation of the applicable Windows operating system. 11. After the OS is installed, open Device Manager and verify the following: Expand Storage Controllers: there is an entry listed as AMD-RAID Bottom Device. Expand Storage Controllers: there is an entry listed as AMD-RAID Controller. Expand System Devices: there is an entry listed as AMD-RAID Config Device. 12. Remove the storage medium and Microsoft Windows OS CD -ROM or DVD from the applicable drive(s) or port.
Proceed Installing the AMD RAIDXpert2 Management Suite for Windows ® . (Refer to Chapter 6 ) Chapter 5 Install AMD-RAID Drivers 19