Myford Каталог Инструментов и Аксессуаров: Полный Список и Описание (EN)

DESCRIPTION CODE Tray top cabinet stand, fitted with two mats, deep tray (No, 201V24), raising blocks (No.20/025) and terminal block only 20/038 As stand 20/038 but fitted with drum type reversing switch As stand 20/038 but fitted with push button starter incorporating overload and no-volt release As stand 20/038 but fitted with drum type reversing switch and push button starter incorporating overload and no-volt release Note: Stands 20/039 and 20/040 meet the safety requirements of Education Authorities Cabinet stands for long bed lathes add suffix L (e.9.20/038L), to stand price add ..

When ordering give exact details (voltage, phase, periodicity) 201023 20i039 201040 m1021 Deep tray only with drain plug, (as fitted to above stands) Note: To prevent interference between the top of the tray and the operator's hands, this should be used only in coniunction with No.20/025 raising blocks Deep tray as above but for long bed lathes Raising blocks with lack screws and securing screws ..

pair 20t0uL 201025 Steel drip tray, with drain plug enamelled silver metallic for standard bed lathes admitting 19" between centres ONLY z|5io Coolant equipment supplied separately for external mounting, including pump, tank, delivery and return pipes, delivery fitting for saddle with bracket, cock and telescopic pipe, also pump switch built into pump: for three phase lor single phase .. .. Give exact details (voltage,'phase and' periodicity) when ordering.

Industrial stand with isolator, rotary reversing switch for lathe drive motor, shelf in tool locker, lock and two keys for locker door, and mat for open front shelves Industrial stand as above, but with no-volt and overload releases r488/A 1488/8 118f.11 push button starter and 118f/2 Industrial stand as above, complete with fullcoolant equipment, including pump, tank, delivery and return pipes, delivery fitting {or saddle with bracket, cock and telescopic pipe, pump switch, push button starter, reversing switch and isolator:

for three phase, with coolant tank mounted internally for single phase, with coolant tank mounted internally for three phase, with coolant tank mounted externally for single phase, with coolant tank mounted externally Splash guard Splash guard for long bed lathes N.B. When ordering splashguards for existing stands please state whether for stand with curved or rectangular drip tray. 1{86/3A r{86/38 r{86/3C r{86/3D 14a7 t{87L chucksandchuckguard Geared scroll chucks size 4" (100mm), 3 law, with threaded bodies to screw direct on to the spindle nose. This design eliminates the separate backplate, resulting in increased rigidity and reduced overhang.

Complete with inside and outside jaws 4' (100mm) 3 jaw G.S. MYFORD BURNERD economy chuck (with unground body) 1588-10000 (30MX) with threaded body . . 4' (100mm) 3 jaw G.S. MYFORD BURNERD chuck 1588-10130 (30M) with threaded body 4' (100mm) 3 iaw G.S. MYFORD BURNERD "GRIPTRU" chuck 1638-10130 (130M) with micro adjusting screws for setting of true running of component and with threaded body 4' (100mm) 3 jaw G.S. super precision MYFORD BURNERD chuck 1278-10130 (30MP) with precision ground scroll and threaded body Also available: 4" (1fi)mm) 3 iaw G.S.

Burnerd chuck 1580-01005 for backplate mounting - without backplate 6" (150mm) 4 jaw independent MYFORD BURNERD chuck 1548-16130 (34M) with threaded body Also avilable: 6' (150mm) 4 jaw independent Burnerd chuck 1540-11601 with recess for backplate mounting - without backplate 4*' (120mm) Eclipse magnetic chuck fitted with backplate for screwing to the spindle nose. The circular grooves in the face help with the centring of workpieces 40/063 40/003 40/004 401012 40/050 40i0r5 4il.1012 4nl0r8 40/034

Стр. 2

Chuck guard accommodates both 3 law and 4 jaw chucks - swings clear to provide single point fixing ready access for loading and unloading; DESCRIPTION CODE 301022 Essential for industrial and educational applications in order to comply with safety regulations. Transparent safety shield (not illustrated) with magnetic base for cross-slide or bed mounting; the tough Acrylic screen, 10' x 71" (254 x 190mm), provides safe vision with protection from flying chips and coolant 30/0s2 Drill chucks, 3 iaw of the key type, with No.2 morse taper arbors 0 - *' (9'5mm) 0 - |" (12.5mm) .. 4rl0/0l 1r1002 electrical equipment Motor, 1425 r.p.m.50 Hz.

or 1750 r.p.m.60 Hz - give exact details (voltage, phase, periodicity) when ordering I H,P, single phase, capacitor start I H.P, three phase When supplied with a lathe, the necessary securing bolts, with nuts and washers are included. When supplied with a lathe and switch (either bench or cabinet model) wiring is included. 60/029 60/firA ,ffi ffi Push button starter with no-volt and overload release MEM 826 A.D.S. for 2001250 volts A.C. MEM 246 A.D.S. for 4001440 volts A.C. Give exact details (voltage, and periodicity) when ordering. 60/025 60/021 Drum type reversing switch is a universal switch suitable lor single phase or three phase A.C.

lt can be bench or wall mounted and in the case of changewheel drive lathes it can be mounted on a bracket attached to the lathe bed lust below the headstock, Where the drum type reversing switch and motor are ordered with the lathe, wiring from switch to motor is included Bracket for above for bench lathes, Nos. 10/038, 10/040, 10/048 and 10/050 Extra fifting to machine at works 6o/004 494,f! 30/001 Sale work light complete with transformer, arm in three parts to give lull adlustment of movement, shade and bulb. The output is 25 volts 40 watt When ordering state exact input voltage. 60/023 centne lathe Four tool turret enables tools to be kept ready mounted for immediate use.

An index ring and spring loaded plunger provide positive location in any one of eight positions. lt is designed for use with ft'(8mm) square cutter bit blanks . , Fixed steady arranged for single point clamping to the bed has a hinged cap to facilitate loading and unloading and three reversible bronze bearing steady shoes. Maximum capacity 2' (50mm) diameter Travelling steady for attachment to left hand side of saddle by single bolt has two reversible bronze steady shoes. Maximum capacity 2' (50mm) diameter 1410 1412 11lo 1412 l1l3 Rear tool post accepts tools having shanks up to *' (12mm) square.

Tools are inverted so that lathe runs in normal direction, When mounted in rear slot on cross-slide, distance between inner face and rear face of topslide is, on Super 7, 4S" (110mm); on ML7-R with standard cross-slide, 2*" (67mm); with long cross-slide, 4$" (105mm) Taperturning attachment, arranged for bolting on to a machin- ed facing at the back of the bed. The holes for the securing screws are so arranged that the attachment can be used along any portion of the bed. Angular movement is 10' either side of zero, The slide base is 9' (228mm) long giving a working length fortaperturning of 6" (150mm) .. ,.

t468 Long cross-slide is 1f' (41 mm) longer than standard and has an extra tee slot, leaving ample space between tools when the rear toolpost is in use Extra long feedscrew will increase the length of travel of the long cross-slide, lor milling etc. to 7' (178mm) Both for ML7-R only; Super 7 has long slide as standard.

Countershaft clutch unit (for fitting to existing machine); ideal for'inching'the spindle also in applications which callfor very lrequent starting and stopping of the spindle For ML7-R only; $ups1 7 has clutch as standard, Leadscrew handwheel having 125 divisions each representing 0'001'and pointerfor it which is attached to the bed by means of a single screw inserted into the tapped hole provided. Used in order to obtain a fine hand feed to the carriage or for accurate length work during turning, boring or milling operations Also available graduated in 0.02mm divisions, (ML7-R only; standard equipment on Super 7). 1429 1ft? 43239 30/040 t430

Стр. 3

DESCR!PTION CODE Faceplate 9" (228mm) diameter for work which is too large for mounting on to the standard 6f' (170mm) diameter faceplate. lt has eight radial slots for the securing bolts for workpieces or angle plates etc. r437 Thread dial indicatorforattachmentto right hand side ofapron. Graduated to show when the leadscrew nut should be engaged on subsequent cuts when cutting wholeor half numberT.P.l, .. 14rS Fine feed tumbler cluster for feeds down to 0.0018' (0.M5mm); replaces the standard cluster gear on the tumbler reverse swing pin. For ML7-R and Super 7, not ML7-RB or Super 78 .. t974A Lathe cover made in when not in use . .

For long bed lathes polythene will help to protect the lathe 1669 1669A I production equipment Lever operated collet chuck has all components hardened and ground. lt is ol the backplate mounting type so that if ordered subsequently for an existing machine the backplate can be finished in position on the lathe thus giving the maximum possible degree of concentricity. lf supplied subsequently lf supplied with machine 201165R 20/065F Collets for it are of the "dead length" type. Sizes from fr'to f" x 64ths, also zmm to 16mm x |mm increments .. .. each 1027 Six station self indexing turret arranged for mounting to the bed, converts the lathe for capstan work.

The inclined turret head and adiustable length stops, which are coupled to it, aro auto- matically rotated.during the return movement of the slide. Not suitable for 10/038 and 10/fi19 lathes admitting 19" (483mm) be- tween centres and having power cross traverse. Excluding tools illustrated .. m/068 Turret tooling (f" diameter shanks). Tap holder, self-releasing,fortaps having f" diameter shanks . . IA Die holder, self-releasing, for button dies 1' diameter; maximum thread length f" 2A Adjustable stop .. 6A Plain round drill holder for drill shank diameter |' 9A Turning and drilling and centre drilling, diameter fo Drilling and facing toolholder, drill shank diameter {' . .

toolholder, suitable also for chamfering maximum turning length 1", drlll shank 124 t3A Recessing toolholder, Stool bores f" diameter, maximum stroke 1|", front and rear adlustable stops .. ., r6A Small drillholder, self centring chuck, maximum drill size f' 17A Box turning toolholder with 2 vee steadies and two tools, maximum turning diameterf', maximum turning length 2f' 20A Ending toolholder, for rounding, pointing chamfering 2:24 MA

Стр. 4

DESCRIPTION CODE Knurling toolholder, adjustable, maximum knurling length 1*' .. 8A Roller steady box, tangential cutting, maximum turning diameter jl", maximum turning length 1f", minimum steady diameterf' , . 604 Floating holder, lor reamers etc. bored |' diameter 590A Cut-otr Slide - lever operated with front and rear tool posts, eqch having tee slot adjustment, gives provision lor both parting off and forming. Adjustable stops are provided for both lront and reartools, Maximum stroke 3n (75mm), maximum swing over slide 2f" (70mm). Tool section $" (10mm) square 20/088 Turret attachment for mounting on the cross-slide.

All the tooling listed above for 20/068 can be utllised in conjunction with this attachment. Excluding tools illustrated .. .. t{08 Multi-stop, for use with No. 1408 turret attachment is bolted on to the back of the bed, and to the saddle, beneath the rear strip. Six length stops are provided which can prove a useful facillhT for normal turning independent of the turret. Maximum strok6 4*" (114mm), stop screw adjustment 2" (50mm) l{83 The lever operated tailstock attachment, can readily be inter- changed with the standard handwheel and barrel whenever a number of components has to be drilled or centred. An ad- justable stop is fitted stroke 2*' (57mm) for accurate depth control.

Maximum t610 milling equipment Vertical slide, plain type is attached to the cross-slide by means of two tee bolts. The slide table is 5|' (13ilmm) x 2f' (70mm), the feedscrew is 10 T.P.l. and is fitted with a mlcrometer dial with 0.fi)1' graduations. Table provided with two clamping screws. Slide movement, with table facing headstock spindle 3t' (82mm). Also available with 2mm pitch feed screw and 0.02mm graduations 67lr Vertical slide, swivelling type, is attached to the cross-slide by means of two tee bolts and is arranged to pivot in both vertical and horizontal planes. The angle bracket which has large area contact faces for maximum rigidity is graduated for both movements.

The table size is 5' (127mm) x 4' (101mm) and the feedscrew is fitted with a micrometer dial having 0.fi)l' gradua- tions. Table provided with two clamping screws, Slide move- ment, with table facing headstock spindle, 3' (76mm). Also available with 2mm pitch feed screw and 0.02mm graduations. 6?/r Raising block,2{" (54mm) high, for 6711 and 68/2 vertical slide; increases versatility also capacity of 1495 dividing attachment. (Can also be used at rear ol cross-slide) il12 30/0ll 30/0t1 Dividing attachment is arranged for mounting on to either the 6/1 plain or 68/2 swivelling vertical slide.

lt is complete with two division plates covering all numbers up to 50 and all even numbers up to 100 excepting 88. Many numbers above 100 can also be obtained t495 Extra plates (2) cover No.88 and allthe remaining odd numbers up to 100 palr 1471

Стр. 5