C-Frame Solenoids Direct acting solenoid 4000118 The direct acting solenoid 4000118 is a open frame solenoid with armature and punched bracket. The armature is guided in highly wear- resistant maintenance-free precision bearings on both sides. Excels by Cost-optimized design Parts at risk of corrosion are galvanised and passivated. The armature is chemically nickel-plated. Return by return spring The solenoids can be installed in any position. The force transfer should be in axial direction only. Lateral load results in increased wear of bearing Compact design The mounting can be made by threaded holes at the frame base.
Accessories Model ■ ■ Fork head (Page 23) ■ ■ Protection class IP00 ■ ■ Optional without spring ■ ■ Standard duty cycle = 100 % ED ■ ■ Standard rated voltage = 24 V DC Dimension Drawing Armature position shown in energised condition Armature position shown in currentless condition 14