Technical Data Other voltages and duty cycles are available on request +44 (0)1264 364194 sales@impulseautomation.co.uk Stroke Force Curves LCM010015A00 (SLP 2515) LCM015020A00 (SLP 3020) The power indicated is reached at 90% of the rated voltage. The solenoids can be installed in any position, but the force transfer should be in axial direction only. The values for the duty cycles are reference values and apply for rated voltage, warmed-up condition and load with 70% of the magnetic force of the device.
[N] [N] [mm] [mm] s s Values in brackets = old designation LCM024030A00 (SLP 4030) LCM025030A00 (SLP 6030) [N] [N] Duty cycle a - 100 % b - 40 % c - 25 % d - 5 % [mm] [mm] s s Permanent-magnetic holding force with air gap „0“ 20 LCM010015A00 LCM015020A00 LCM024030A00 LCM025030A00 Duty cycle [%] 100 40 25 5 100 40 25 5 100 40 25 5 100 40 25 5 Stroke [mm] 2 4 8 8 Response time [ms] 45 37 34 30 60 56 54 50 80 75 70 60 83 75 75 70 Pull-in consumption [W] 2.6 4.5 6 15.8 3.7 7.1 9.9 30.6 6.6 13.5 19.8 70.4 9.1 19 28 104 Reset power consumption [W] 1.3 2.8 2.8 7.3 Armature weight [kg] 0.005 0.011 0.032 0.045 Solenoid weight [kg] 0.022 0.045 0.15 0.225 Insulation class E E E E