D-Frame Solenoids Direct acting solenoid LCL-D The D-Frame Solenoids of the type series LCL meet high standards in terms of performance and life expectancy. Compact dimensions and low power consumption, fast switching times and smooth operation characterise this series. The housing is made of precision steel tube. The armature is guided in highly wear-resistant maintenance-free precision bearings on both sides, resulting in consistent solenoid performance throughout the long service life. Parts at risk of corrosion are electro-galvanized. The armature is chemically nickel-plated. Either lateral or front mounting via threaded holes is possible.
Accessories Model ■ ■ Fork head (Page 23) ■ ■ Connection by connector plug-Protection class IP65 ■ ■ Plug-in connector (Page 22) ■ ■ Lead wires - Protection class IP00 ■ ■ Optimization of control by micro power controllers on request ■ ■ Standard rated voltage = 24 V DC / 205 V DC ■ ■ Standard duty cycle = 100% ED LCL-D Standard Excels by The coil is supplied encapsulated with plastics as standard. Compact design Pushing & pulling application Accessories: Return spring can be used (Page 21) Model: Device - Protection class IP40 Insulation class „B“ - 130°C Maintenance-free use LCL-D with bellow Excels by The coil is supplied encapsulated as standard Higher protection class Accessories:
Return spring can not be used Model: Device - Protection class IP54 Insulation class „B“ - 130°C 6