Table 3-10. Printing Menu (continued) 112 Chapter 3 Operating Overview C4265-90907 Item Values Explanation PCL FONT POINT SIZE=12.00 4.00 to 999.75 This item may not appear, depending on the font selected. Press - VALUE + once to change setting by increments of 0.25 for point size, or hold down - VALUE + to scroll by increments of 1. PCL SYMBOL SET=PC-8 PC-8 many others Select any one of several available symbol sets from the printer’s control panel. A symbol set is a unique grouping of all the characters in a font. PC-8 or PC-850 is recommended for line draw characters. COURIER=REGULAR REGULAR DARK Select the version of Courier font to use: REGULAR:
The internal Courier font available on the HP LaserJet 4 Series printers. DARK: The internal Courier font available on the HP LaserJet III Series printers. Both fonts are not available at the same time. WIDE A4=NO NO YES The Wide A4 setting changes the number of characters that can be printed on a single line of A4 paper. NO: Up to 78 10-pitch characters can be printed on one line. YES: Up to 80 10-pitch characters can be printed on one line. APPEND CR TO LF= NO NO YES Select YES to append a carriage return to each line feed encountered in backward-compatible PCL jobs (pure text, no job control). Some environments, such as UNIX, indicate a new line using only the line feed control code.
This option allows the user to append the required carriage return to each line feed. PRINT PS ERRORS=OFF OFF ON Select ON to print the PS error page when PS errors occur. EDGE TO EDGE OVERRIDE= OFF OFF ON HP LaserJet 8150 series only. Turns the edge-to- edge mode on or off for all print jobs. This mode can be overridden inside a print job by an edge-to-edge PJL variable.