Testing the Printer Paper Path Test You can test printer operation with the Paper Path Test. It will print 1, 10, 50, 100, or 500 (single or 2-sided) pages from any of the paper trays (or the Envelope Feeder) and deliver them to a previously specified output bin. First, select PAPER DESTINATION and 2-SIDED printing (if a duplexer is installed) in the Configuration Menu (table 3-11), and then run the Paper Path Test from the Information Menu (table 3-7). Note If feeding from Tray 1, the default output will always be the Face-up Bin. 2 Press (-)I TEM twice. 1 Press M ENU . 3 Press S ELECT and continue making your desired paper path test. 4 Press S ELECT to execute the test.
Configuration Page When you print a Configuration Page, the printer checks its internal controller and I/O interface, then prints a page showing the overall printer configuration (see figure 7-17 on page 654), and a Menu Map showing the current menu settings (see figure 7-16 on page 652). You can review these printouts to verify proper installation of installed accessories, options, and personalities. 1 Press M ENU until INFORMATION MENU appears. 2 Press I TEM until PRINT CONFIGURATION appears. 3 Press S ELECT to print the configuration pages. For sample information pages, see “Information Pages” on page 651. C4265-90907 Testing the Printer 153