7 Tighten both screws. 8 Loosen both screws that support the paper tray locking bracket on the left side of the 2000-sheet Input Tray. 9 Locate the bracket hole and pin at the middle (left side). Slide the bracket so the locating pin is positioned at the middle of the bracket hole. 10 Tighten both screws. 11 Reassemble the vertical transfer unit. 12 Make sure all the cables (vertical transfer unit and paper deck drive assembly) are reconnected. 13 Reinstall left, right, and rear covers to the tray. Note The locating pin position at the middle could still be unacceptable for some customers’ applications.
If so, repeat the procedure by moving the locating pin further back and testing the margin obtained. C4265-90907 Adjusting the 2000-sheet Printer Input Tray 173