Feeder Assembly Figure 6-33 Feeder Assembly (1 of 2) 1 Open the left access door and remove the Duplexer (if installed). 2 Remove the Fusing Assembly (see figure 6-36 on page 306). 3 Open the Top Cover and remove the Toner Cartridge. 4 Remove the Transfer Roller Assembly (see figure 6-62 on page 337). 5 Remove the Registration Assembly (see figure 6-53 on page 325). 6 Unplug the sensor cable at the right side of the Feeder Assembly (figure 6-33, callout 1). 7 Remove 2 screws at the front of the Feeder Assembly (figure 6-33, callout 2). 302 Chapter 6 Removal and Replacement C4265-90907