Removing and Replacing the Formatter Assembly Figure 6-35 Formatter Assembly Note The Formatter Assembly is extremely sensitive to electrostatic discharge (ESD). DIMMs and the Formatter PCA can be damaged by small amounts of ESD. Wear an anti-static wrist wrap when removing or replacing any of these components 1 If the Formatter is to be replaced, make sure to note the page count. 2 Loosen the two captive screws (figure 6-35, callout 1), and slide the Formatter PCA out of the chassis. 3 After installation of a replacement Formatter, be sure to re-enter the serial number, page count, and maintenance count.
(See table 3-24 on page 141 for more information.) C4265-90907 Printer Assembly Removal and Replacement 305