PCA, DC Controller Figure 6-43 DC Controller PCA 1 Remove the Formatter Assembly (see figure 6-35 on page 305). 2 Remove the back cover (see figure 6-6 on page 273). 3 Remove the High Voltage Power Supply (see figure 6-51 on page 323). 4 Unplug 19 connectors from the PCA (figure 6-43, callout 1). 5 Remove 2 screws (figure 6-43, callout 2) from the left side of the PCA and 2 self-tapping screws (figure 6-43, callout 3) from the right side of the PCA. 6 Carefully tip the left side of the PCA outward to clear the Formatter PCA connector from the card cage. To Reinstall:
Make sure the retaining clip posts (figure 6-43, callout 4) and the two locator pins (figure 6-43, callout 5) are properly aligned. C4265-90907 Printer Assembly Removal and Replacement 315