ADF Latch Cap Figure 6-205 ADF Latch Cap CAUTION A magnetic screwdriver is required to remove the ADF Latch Cap. 1 Open the ADF. 2 Locate the screw inside the ADF Latch Cap. 3 Depress the ADF Latch Cap until you can reach the screw with a magnetic screwdriver. CAUTION Be careful not to drop the screw. 4 Remove the TP screw (m3x8). To replace 1 Depress the lever for the ADF Latch Cap until the screw hole is accessible. 2 Use a magnetic screwdriver to place the screw in the hole. 3 Replace the ADF Latch Cap and tighten the screw. C4265-90907 Copy Module Skins 511