Power Supply and Main Board Tray WARNING! Make sure the power is off and the main power to the system has been disconnected before servicing. See “Electrostatic Discharge (ESD) Precautions” on page 256. Figure 6-219 Power Supply and Main Board Tray (1 of 2) 1 Remove 2 brass machine screws with washers (m3x8) (callout 1). 2 Pull the Assembly out by the handle (callout 2) approximately 2.5 inches (6 centimeters). C4265-90907 Copy Module Power Supply/Main Board Assemblies 525