HP — Optical Unit

CAUTION Do not remove the CCD PCA or any of the screws on the Optical Unit other than the screws mentioned. Do not disassemble the Optical Unit. Figure 6-230 Optical Unit (2 of 2) 3 Holding the Optical Unit, release the ADF lever and open the ADF Assembly 45°. Rotate the Optical Unit as shown (the green board is on top and level) (callout 1). 4 Slide the Optical unit to the left off the slots in the metal bar (callout 2). Note The replacement Optical Unit includes a Back Side Lamp and Lamp Inverter PCA, but not an Optical Unit Tie-down with Pad. 536 Chapter 6 Removal and Replacement C4265-90907