HP — Miscellaneous Problems and Solutions

General Troubleshooting Information Note For information on the 3,000-sheet Stapler/Stacker, see HP 3,000- sheet Stapler/Stacker Service Manual Supplement for Paper-Handling Accessories (C4788-90904). Miscellaneous Problems and Solutions The following lists symptoms and typical solutions to those problems. Abnormal noises are evident, such as grinding or chattering when main motor energized. From the toner cartridge area: 1 Replace the toner cartridge. 2 Replace the Main Gear Assembly. See Main Gear Assembly on page 310 for instructions. From Tray 2 or 3: 1 Verify proper paper loading, acceptable media. 2 Inspect the “fingers” on the paper trays to ensure proper paper size detection.

3 Replace the Paper Input Unit. See Paper Input Unit (PIU) on page 314 for instructions. 4 Replace the Main Gear Assembly. See Main Gear Assembly on page 310 for instructions. From 2000-sheet Input Tray: 1 Check the white plastic bushing on Tray 4. The bushing is located on the Tray 4 main drive assembly. The bushing accepts the Tray 4 pilot pin when Tray 4 is closed. Replace if broken. 2 Replace 2000-sheet Input Tray Vertical Transfer Assembly. 3 Replace the 2000-sheet Input Tray Main Drive Assembly. From 8-bin Mailbox: 1 Verify pawls are riding above the output rollers (see figure 7-25 on page 703). 2 Check the (small rollers in the flipper area). 588 Chapter 7 Troubleshooting C4265-90907