L-4733A/L-4733AW/L-4533A/L-4533AW/L-4033A/L-4033AW Cost Estimate Support Tool Guide Cost Estimating Procedure Before Creating Cost Estimate This section explains the preparations you need to make before using the Cost Estimate Support Tool. A Check the submission data. Prepare submission data (artwork) for the label for which you want to create an estimate, and then check the design, size, and so on for the submission data. B Examine the substrate width and print mode. Select the substrate width and print mode used for printing. C Perform label pagination. Perform pagination for print repetitions (Per Data) depending on the substrate width.
You need software such as Adobe Illustrator to perform pagination. To estimate cost correctly, perform pagination to match the layout to be used for printing. D Output paginated data to a local folder using the printer driver. Output paginated data from the printer driver. Set a local folder as the output location for the print data, and create a print job (folder). See the "Printer Driver Guide" for more information on creating a print job from the printer driver. Use the output print job on the Cost Estimate Support Tool. Make a note of the save location path. You can then specify the file you want when operating the Cost Estimate Support Tool. This completes this section. 13