L-6534VW Operation Guide Basic Operations This completes this section. A If the Feed Ready switch lamp on the press is on, press the Feed Ready switch to release the tension from the substrate. Check that the Feed Ready switch lamp is off. 116 Press Remove the substrate from the rewinder axis. Press Install the paper core on the rewinder axis. Press Attach the substrate to the paper core. Control panel Press the Feed Ready switch on the press to apply tension to the substrate. Touch panel Set for the substrate. U “Setting after Replacing the Substrate (Eye Mark for Reverse Feeding: Use)” on page 121 U “Setting after Replacing the Substrate (Eye Mark for Reverse Feeding:
Do Not Use)” on page 124